Wendt X5 Audio Mixer
Operating Instructions

Left Side Panel
Click on this image for a closer view

1. Mic Inputs, Channel 1 5 The XLR mic inputs are electronically balanced where pin 1 is shielded ground, pin 2 is input high, and pin 3 is input low.

2. Mic Powering The mic powering switches labeled 48, DYN, 12T allow 3 modes of mic powering, 48V phantom, 12V T power (pin 2 is positive voltage) and dynamic DYN (which is non powered).

3. Accessory Connector A quick-release Hirose 12 pin connector is tied to the mixer line (B) outputs and stereo unbalanced returns which are algebraically summed with the line (B) returns via the mini jack on the right panel. These returns and line outs are all stereo right and left. The mating connector is Hirose part number HR10A-10P-12P.

B A C K N E X T


Home Page

Wendt Inc.  Westlake Village, CA   |   USA
www.wendtinc.net           E-mail: wendt_inc@earthlink.net
2003 Wendt Inc.